![]() ![]() ENSURE THAT THE WASHER IS ON THE SCREW BEFORE THE SCREW IS USED TO ATTACH THE SLIDER. ![]() NOTICE: THE SUPPLIED SCREW MUST HAVE A WASHER ON IT. Above is an illustration for the left side. The screw is accessible with the fairing in place. On the left, the fairing does not block the mounting point. Make certain that the right side is tight before removing the left side screw.Ħ. ENSURE THAT THE WASHERS ARE ON THE SCREW BEFORE THE SCREW IS USED TO ATTACH THE SLIDER. If thread locker and proper torque is not used the frame slider could possibly fall off of the bracket while riding due to vibration. NOTICE: THIS SPECIFIC SCREW MUST HAVE A LOCK WASHER AND FLAT WASHER ON IT AND SHOULD ALREADY BE IN PLACE UPON RECEIPT. Medium strength (blue) thread locker (on this screw only) is required. Remove the slider to bracket screw and apply blue thread locker to it, then tighten the screw. 15-20 ft/lbs of torque is recommended. Note: Although the slider and bracket assembly comes pre-assembled, it is not pre-torqued. Wrench, tighten to the factory torque specification. Angle the slider and bracket assembly similar to the one pictured (figure A) then tighten. Thread the screw in by hand a couple turns to ensure proper thread engagement.Ĥ. Install the slider and bracket assembly using the supplied screw and washer and a 8mm hex driver/ratchet. NOTICE: THE SCREW MUST HAVE A WASHER ON IT. The screw goes through the frame and into the side of the engine cylinder head.ģ. This is the screw closest to the cowl opening for Locate and remove (12mm socket) the forward, upper engine mount screw. WARNING: The installation of all parts in these installation instructions must be performed by a qualified motorcycle mechanic who is using the correct tools and who understands the correct use of all tools required to complete the installation.Ģ. 03-05 Yamaha R6, 06-09 R6S Installation Instructions for: ![]()
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |